Suzuki Wagon R Plus RB310 Service Manual page 685

7B1-116 AUTOMATIC TRANSAXLE (M13 ENGINE)
Dismounting
1) Take down transaxle with engine. For its procedure, refer to
"Engine Assembly" in Section 6A2.
2) Remove lower stiffener (1).
1
3) Remove drive plate to torque converter bolts.
To lock drive plate (1), engage flat head rod or the like (2)
with drive plate ring gear.
4) Remove starting motor.
WARNING:
Be sure to keep transaxle with torque converter horizon-
tal or facing up throughout the work. Should it be tilted
with torque converter down, converter may fall off and
cause personal injury.
NOTE:
When detaching transaxle from engine, move it in paral-
lel with crankshaft and use care so as not to apply exces-
sive force to drive plate and torque converter.
5) Remove bolts and nut fastening engine and transaxle, then
detach transaxle from engine.