Table of Contents
Advertisement
6A2-36 ENGINE MECHANICAL (M13 ENGINE)
1
2
2
1
2
1
(a)
(b)
4
(b)
5
8) Remove water outlet cap (1) from timing chain cover (2).
9) Remove timing chain cover.
10) Remove oil gallery pipe No.1 (1) and oil control valve (2)
3
Installation
1) Clean sealing surface on timing chain cover, cylinder block
2) Install new O-ring (1) to oil control valve (2).
3) Install oil control valve to timing chain cover (3).
Tightening torque
Oil control valve mounting nut
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
4) Install oil gallery pipe No.1 (4) with new copper washers (5)
Tightening torque
Oil gallery pipe No.1 bolt
(b): 30 N·m (3.0 kg-m, 21.5 lb-ft)
3
from timing chain cover (3).
and cylinder head.
Remove oil, old sealant and dust from sealing surface.
Tighten nuts to specification.
to timing chain cover.
Tighten bolts to specification.
Advertisement
Table of Contents
