Toro TimeCutter HD X4850 Operator's Manual page 25

1. Locknuts—front of
discharge plate (install
after removing the baffle)
2. Hex-head bolt—forward
hole in deck (install after
removing the baffle)
3. Locknut—forward hole in
deck (install after removing
the baffle)
4. Carriage bolts—front of
discharge plate (install
after removing the baffle)
9. Locate the baffle guard at the front edge of the
side discharge opening
10. Remove the fasteners securing the baffle guard
and the right baffle to the mower deck
33).
Note:
Remove the baffle guard and retain all
fasteners.
11. Remove the 2 locknuts (5/16 inch) securing the
welded posts of the right baffle to the top of
the mower deck at center and right of center
positions (Figure
Figure 33
5. Baffle guard—54-inch
decks
6. Locknut (5/16 inch)
7. Carriage bolt (5/16 x 3/4
inch)
(Figure 33).
34).
g190737
1. Locknut (5/16 inch)
2. Right baffle
12. Remove the carriage bolt and locknut securing
the right baffle to the top of the mower deck and
remove the right baffle from the mower deck
(Figure
13. Install the fasteners removed previously at the
front holes in the discharge plate and forward
hole in the deck
14. Locate the cutoff baffle in the loose parts bag,
remove the fasteners at the rear holes of the
discharge plate, and install the baffle at the
side-discharge opening on the mower deck
(Figure
(Figure
25
Figure 34
3. Welded posts (right baffle)
34).
(Figure 33).
35).
g010704