Korg prologue Owner's Manual page 67

Controlling the prologue from an external MIDI device
If you want to play or control the prologue from another MIDI keyboard, sequencer,
or other device, connect the MIDI OUT connector of the external MIDI device to the
prologue's MIDI IN connector with a MIDI cable.
Connecting the prologue to a computer via MIDI
You might want to play the prologue's keyboard and record your performance on
an external MIDI sequencer or computer (connected using the MIDI interface), and
then play the prologue while monitoring or playing back what you recorded. You
also might want to use the prologue as both an input device for playing notes and as
a MIDI tone generator. In either case, you'll need to connect the MIDI OUT connec-
tor to the MIDI IN connector on both the prologue and the external MIDI sequencer
or computer.
MIDI IN
Some MIDI interface devices may be unable to transmit or receive MIDI
SysEx messages to or from the prologue.
It's convenient to use the USB connector when connecting the prologue to
TIP
a personal computer.
Connecting the prologue to a computer via USB
In order to use a USB connection, you'll need to install the Korg USB-MIDI driver on
your computer. Download the "Korg USB-MIDI driver" from the Korg website, and
install it as described in the accompanying documentation.
If either the MIDI connection or the USB connection is not working prop-
erly, check the settings in button 4 "MIDI Route" (p.59) in the GLOBAL
EDIT mode.
MIDI IN
prologue
MIDI OUT
MIDI IN
MIDI interface
MIDI OUT
prologue
MIDI OUT
MIDI keyboard
Computer
67