Vco 1/Vco 2/Multi Engine Section - Korg prologue Owner's Manual

VCO 1/VCO 2/MULTI ENGINE section

VCO 1, VCO 2
VCO: Voltage Controlled Oscillators
There are two voltage controlled analog oscillators for
each voice on prologue. Oscillator Parameters include
the settings for the oscillator pitch (OCTAVE, PITCH)
and the waveform (WAVE, SHAPE).
WAVE switch
This sets the waveforms for Oscillators 1 and 2.
Square wave: This waveform has a sound that can be used to create wind instru-
ment-type timbres, electronic sounds, and imitate vintage video games.
Triangle wave: This waveform has less high end harmonic content than a sawtooth
or square wave, and so has a more round, less aggressive feel.
Sawtooth wave: This waveform is the most common analog synthesizer waveform,
and can be used to recreate anything from standard synth sounds to basses, brass,
and strings.
OCTAVE switch
The pitch of Oscillators 1 and 2 can be set in octave steps.
PITCH knob
The pitch, or tuning, of Oscillators 1 and 2 can be set using steps of one cent.
[ , , ]
[2', 4', 8', 16']
[-1200...+1200]
24