Korg prologue Owner's Manual page 10

1.
Lower the volume of your powered monitors or external output system, and
turn them off.
2.
Turn off the Power switch on the rear panel of the prologue.
Once you have turned the prologue off, wait about 10 seconds before turn-
ing the prologue on again.
Auto Power Off Feature
The prologue features an Auto Power Off feature that can automatically turn the
prologue off after 4 hours have elapsed with no operation of the knobs, switches,
buttons, or keyboard of the prologue. By default, the factory setting for the Auto
Power Off is enabled. The Auto Power Off can be disabled using the steps below.
1.
Press the EDIT MODE button.
The prologue will enter the Edit Mode, and the display will look like the illustra-
tion shown below.
2.
Turn the PROGRAM/VALUE knob, and select GLOBAL EDIT.
GLOBAL EDIT can also be selected by pressing the EDIT MODE button.
TIP
3.
Press button 8 twice.
"Auto Power Off" will be displayed.
4.
Turn the PROGRAM/VALUE knob, and select "Off".
5.
Press the EXIT button.
The prologue will enter the Play mode, and the display will indicate the current
Program.
Settings in GLOBAL EDIT are saved automatically.
TIP
3 1
10
2, 4
5