Korg prologue Owner's Manual page 41

Program fetch function
Use the program fetch function to copy the sound of a program to the sub-timbre of
the currently selected program. This function is especially convenient for combining
sounds and hearing how they sound together.
prologue-16
1.
Hold down the SUB ON/PGM FETCH button.
The prologue will enter the PROGRAM FETCH settings in FUNCTION mode,
and the current program will be shown in the display.
2.
Turn the PROGRAM/VALUE knob to display the main or sub-timbre of other
programs, and select the sound to copy.
The word "PREV" will display to the right side of the program number in the
display, so that you can confirm the sound.
The main timbre is displayed as "M" at bottom right, and the sub-timbre is dis-
played as "S" at bottom right.
Check the sounds by playing the keyboard.
Initialization programs cannot be selected.
To cancel the program fetch function, press the EXIT button.
TIP
3.
Press the WRITE button.
The sound you selected will be copied to the sub-timbre of the program, and the
display will indicate the message "Complete".
We recommend that you save the program after using the program fetch
TIP
function. Any edits that you make to the current program will be lost if
you turn off the power or recall a different program before saving. See
"Saving a Program" (p.19) for details.
prologue-8
1.
Press the EDIT MODE button to enter FUNCTION mode.
2.
Press PROGRAM SORT/EDIT PAGE button 2.
The prologue will enter the PROGRAM FETCH settings, and the current pro-
gram will be shown in the display.
41