Korg prologue Owner's Manual page 49

Button 6 (OTHER SETTINGS)
Arpeggiator
Sets the timbre(s) that will be played by the arpeggiator.
When this is set to "Main+Sub", both timbres will sound. When this is set to "Main",
the arpeggiator will play only the main timbre; and when this is set to "Sub", only
the sub-timbre will sound.
Multi Routing
This sets whether the MULTI ENGINE is mixed prior to the signal reaching the VCF,
or whether to bypass the VCF and mix.
When this is set to "Post VCF," the VCF will not affect the MULTI ENGINE.
EG Legato
When the voice mode is set to "Mono", "Unison" or "Chord," this sets what hap-
pens with the EG when a key is played in legato while another key is being pressed.
Off: The EG will be retriggered.
On: The EG will not be retriggered.
Portamento Mode
Auto: When playing in a legato style (playing a new note before any previously
played note is released), portamento will be applied.
On: Portamento will be applied, even when fully releasing a key and then playing
the next note.
Voice Spread
This adjusts the amount of voice spread that is applied to achieve a stereo effect.
The higher the value, the stronger the voice spread effect will be.
Program Level
Program Level allows you to adjust the volume of a Program relative to other Pro-
grams.
Increasing this value will make the volume louder.
[Main+Sub, Main, Sub]
[Pre VCF, Post VCF]
[Off, On]
[Auto, On]
[0...127]
[-18.0dB...+6.0dB]
49