REmOVE THE DEFROST THERmOSTAT
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1.
To Remove the defrost thermostat and ther-
mal fuse, begin by removing the evaporator
cover (See page 4-4).
2.
Unclip the metal bracket that secures the
thermostat to the top left of the evaporator.
AND THERmAL FUSE
metal Thermostat
Bracket
3.
Carefully remove the thermal fuse at the right
side of the evaporator.
Wiring connector
4.
Disconnect the wiring connector from the
wiring connector block at position 2. (See
page 4-9) The thermostat and thermal fuse
are connected to the same harness and are
removed together.
4-11
Thermal fuse