Table of Contents
Advertisement
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1.
Open the door
2.
Slide one of the racks out until it stops
COmPONENT ACCESS
REmOVE THE RACKS (UW, BC)
3.
Press the release lever on each side and
slide the rack out of the tracks.
4.
The bottom rack does not slide on tracks.
To remove the bottom rack, lift the rear edge
of the rack to move the rubber stop over the
stop at the back left corner of the unit and
pull the rack out of the unit.
4-1
Release
Lever
Rack Stop
Hide quick links:
Advertisement
Table of Contents
