Searching For A Program By Pty Codes - JVC UX-G110 Instructions Manual

Searching for a Program by
PTY Codes Remote
ONLY
You can locate a particular kind of program from the
preset stations (see page 7) by specifying the PTY codes.
To search for a program using the PTY codes
1
While listening to an FM station...
2
Select a PTY code.
3
Start searching.
The System searches 20 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, "NO FOUND" appear on the
display.
• To stop searching any time during search, press PTY
SEARCH.
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing, press
PTY SEARCH again.
13
Switching Temporarily to a Program of
Your Choice Automatically
The Enhanced Other Networks function allows the System
to switch temporarily to a preset FM station broadcasting
a program of your choice (NEWS or INFO).
• This function works while listening to an FM station
While listening to an FM station...
CD
providing the required signals.
NEWS
Station Frequency
NEWS
News.
INFO
Program the purpose of which is to impart
advice in the widest sense.
How the Enhanced Other Networks function
actually works:
CASE 1
If a station is not broadcasting the program of your
choice
The System continues tuning in to the current station.
When a station broadcasting the program of your choice,
the System automatically switches to the station.
The NEWS/INFO indicator starts flashing.
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 2
If the station currently tuned in is broadcasting the
program of your choice
The NEWS/INFO indicator starts flashing.
When the program is over, the indicator stops flashing
(the function still remains active).
Remote
ONLY
INFO
Ç
Ç
Ç