ProForm PFSY2925.0 User Manual page 13

ATTACHING THE PULLEY HOUSINGS
7
To use a high pulley station, slide the hook on the
19
High Pulley Housing (19) onto the bracket on an
Upright (6 or 7). Attach the end of the Short Cable
(43) without the ball to the end of the Long Cable (42)
with a Clip (29). Attach the other high pulley in the
43
6
Ball
same manner.
To use a squat station, attach the Pulley Housings
(19) to the brackets on the Base (not shown).
To use the low pulley station, attach the two Pulley
Housings (19) to the bracket on the Upright Base (not
shown).
29
42
ATTACHING THE HANDLES
A Handle (26) or the Ankle Strap (not shown) can be
attached to a Short Cable (43) at the high pulley or a
squat station (see ATTACHING THE PULLEY
HOUSINGS above), or to the Long Cable (not shown),
29
43
with a Clip (29).
26
ATTACHING THE SQUAT BAR
The Squat Bar (25) can be attached to the Short
25
Cables (43) at the squat stations (see ATTACHING
29
THE PULLEY HOUSINGS above) with the two
Extension Straps (27) and four Clips (29). Adjust the
length of the Extension Straps as necessary.
27
29
43
43
13