BENDIX TABS-6 Service Data page 17

Diagnostic Trouble Codes
1st 2nd Diagnostic Code
Digit Digit Description
TABS‑6 Adv MC
10 1
Internal Error
TABS‑6 Adv MC
10 2
Configuration Error
TABS‑6 Adv MC
10 3
EEPROM Error
TABS-6 Adv MC Not
Configured
10 4
TABS‑6 Adv MC
10 5 EOL Test Not
Completed
Possible Causes / Repair Information
TABS‑6 Adv MC module
• Check for damaged or corroded connectors.
• Check for damaged wiring.
• After repairs — or if no issues are found — clear the diagnostic code.
• If the diagnostic code persists, contact your local Bendix
representative before replacing the Bendix
module.
• V erify the ECU parameters and actual system installation are
compatible using the Bendix
or higher).
• Re-program the ECU as necessary.
• If necessary, contact your local Bendix representative to obtain the
correct configuration data.
• V erify the ECU parameters and actual system installation are
compatible using the Bendix
or higher).
• R e-program the ECU as necessary.
• If necessary, contact your local Bendix representative to obtain the
correct configuration data.
• R e-program the ECU to be compatible to the actual system
configuration using the Bendix
6.1 or higher).
• If necessary, contact your local Bendix representative to obtain the
correct configuration data.
• Perform the Installation Test using the Bendix
software (version 6.1 or higher), or Bendix
Module.
(DTCs)
(continued)
TABS‑6 Adv MC
® ™
ACom diagnostic software (version 6.1
® ®
ACom diagnostic software (version 6.1
® ®
ACom diagnostic software (version
® ®
ACom
® ®
Trailer Information
®
J1587
(SID/
FMI)
254/12
254/13
254/13
254/13
diagnostic
254/14
J1939
(SPN/
FMI)
629/12
629/13
629/13
629/13
629/14
17