Diagnostic Trouble Codes - BENDIX TABS-6 Service Data

22. DIAGNOSTIC TROUBLE CODES

1st 2nd Diagnostic Code
Digit Digit Description
1 1 No diagnostic codes
Large Air Gap:
2 1
Sensor "S‑C"
Large Air Gap:
3 1
Sensor "S-D"
Large Air Gap:
4 1
Sensor "S-E"
Large Air Gap:
5 1
Sensor "S‑F"
Shorted or open
2 2 wire:
Sensor "S‑C"
Shorted or open
3 2 wire:
Sensor "S-D"
Shorted or open
4 2 wire:
Sensor "S-E"
Shorted or open
5 2 wire:
Sensor "S‑F"
Dynamic Issue:
2 3
Sensor "S‑C"
Dynamic Issue:
3 3
Sensor "S-D"
Dynamic Issue:
4 3
Sensor "S-E"
Dynamic Issue:
5 3
Sensor "S‑F"
Tire Diameter Out of
2 4 Range:
Sensor "S‑C"
Tire Diameter Out of
3 4 Range:
Sensor "S-D"
Tire Diameter Out of
4 4 Range:
Sensor "S-E"
Tire Diameter Out of
5 4 Range:
Sensor "S‑F"
Possible Causes / Repair Information
• The Bendix TABS‑6 Adv MC module system is fully operational –
® ™
no diagnostic codes are detected.
Wheel Speed Sensors (WSS); "S-C", "S-D", "S-E", "S-F"
Dynamic Wheel Speed Sensor DTC - large air gap between sensor
and tone ring.
Go to Section E on Page 38.
Static Wheel Speed Sensor DTC - shorted or open sensor wire.
Go to Section E on Page 38.
Dynamic Wheel Speed Sensor DTC - incorrect wheel speed signal
detected while vehicle is in motion.
Go to Section E on Page 38.
• Verify the correct tire size as desired.
• Verify the proper tire inflation.
• Verify the correct number of exciter/tone ring teeth.
• V erify that the TABS-6 Adv MC module ECU has been programmed
with the correct tire size and tone ring settings.
(DTCS)
J1587 J1939
(SID/ (SPN/
FMI) FMI)
000/00 000/00
001/00 789/00
002/00 790/00
003/00 791/00
004/00 792/00
001/03 789/03
001/04 789/04
002/03 790/03
002/04 790/04
003/03 791/03
003/04 791/04
004/03 792/03
004/04 792/04
001/08 789/08
001/01 789/01
001/02 789/02
002/08 790/08
002/01 790/01
002/02 790/02
003/08 791/08
003/01 791/01
003/02 791/02
004/08 792/08
004/01 792/01
004/02 792/02
001/13 789/13
002/13 790/13
003/13 791/13
004/13 792/13
13