ProForm PFBE64490 User Manual page 11

15. Slide the Weight Carriage (47) onto the Lat Tower (9).
Make sure that the Weight Carriage is oriented as
shown.
Slide the loop on the Cable (45) onto the M10 x
19mm Bolt (46) in the Weight Carriage (47). Attach
the Cable with an M10 Nylon Locknut (11).
Next, slide the Carriage Stop (24) onto the Lat Tower
(9). Make sure that the Carriage Stop is turned so the
lip of the Carriage Bushing (2) is on top. Attach the
Carriage Stop to the indicated hole in the Lat Tower
with the M8 x 70mm Bolt (48) and an M8 Nylon
Locknut (13).
16. Insert the Lat Tower (9) into the Front Leg (19). Make
sure that the Lat Tower is turned as shown.
Secure the Lat Tower with the Adjustment Knob (36).
15
45
11
48
16
9
19
11
9
46
47
13
2
24
36