Important Precautions - ProForm PFBE1816.0 User Manual

Proform user manual weight bench pfbe1816.0
Table of Contents

Advertisement

IMPORTANT PRECAUTIONS

WARNING:
before using the weight bench.
1. Read all instructions in this manual
warnings on the weight bench before using
the weight bench. Use the weight bench only
as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
3. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
Keep the weight bench indoors, away from
4.
moisture and dust. Place the weight bench on
a level surface, with a mat beneath it to pro-
tect the floor or carpet. Make sure that there is
enough clearance around the weight bench to
mount, dismount, and use the weight bench .
5. Keep children under 12 and pets away from
the weight bench at all times.
6.
Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
Always make sure that the backrest knob is
7.
fully engaged before using the backrest.
8.
Wear appropriate clothes when exercising.
Always wear athletic shoes for foot protec-
tion while exercising.
WARNING:
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
To reduce the risk of serious injury, read the following important precautions
and all
Before beginning this or any exercise program, consult your physician. This
9.
The weight bench is designed to support a
maximum user weight of 300 pounds and a
maximum total weight of 610 pounds. Do not
use the weight bench with more than 210
pounds of weight. Do not place more than
130 pounds on the leg lever. Note: The weight
bench does not include weights.
10. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
11.
The decals shown below have been placed
on the weight bench. If a decal is missing or
illegible, call the toll-free telephone number
on the front cover of this manual and order a
free replacement decal. Apply the decal in the
location shown.
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fusion 2.0 x

Table of Contents