Assembly - ProForm GT 95X PFEX3096.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench and Phillips
screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been preattached for shipping. If a
part is not in the parts bag, check to see if it has been preattached.
M8 Nylon M8 Acorn M8 Split M10 Split M8 x 18mm M8 x 19mm
Locknut (47)–4 Nut (29)–2 Washer (66)–4 Washer (48)–4
Washer (41)–2 Washer (65)–4
M4 x 10mm M4 x 16mm M6 x 20mm Button M6 x 38mm Button
M8 x 15mm
Screw (54)–8 Screw (64)–4 Screw (52)–4 Screw (46)–4
Screw (42)–6
M8 x 75mm Carriage M8 x 75mm Button
Bolt (43)–2 Screw (44)–2
M8 x 38mm Button M10 x 25mm Button
Bolt (45)–4 Screw (50)–4
4