Glossary Of Terms - Bosch Solution 2000 User Manual

26 en | Glossary of Terms
6

Glossary of Terms

Term
24-hour zone
alarm condition
answering machine
bypass
Armed (System
ON)
automatic arming
automatic
disarming
AWAY Mode
codepad
day alarm
detector
disarmed
dynamic battery
testing
entry delay
external equipment Any device connected to a security system, such as a detector,
force arming
hand-over delay
2017.09 | 04 | F.01U.298.028
Description
A monitored input where tamper switches and emergency switches can
be connected. If one of these switches is violated at any time (whether
the system is armed or disarmed), an alarm is reported.
The status when an alarm system is armed and one of the detection
devices is violated. A 24-Hour zone (for example, a smoke detector) can
activate when the system is armed or disarmed.
A condition that enables connection with the control panel for remote
arming or remote programming operations when there is an answering
machine or facsimile machine on the same telephone line.
A status in which the system is ready to accept alarms.
Programming that allows the system to arm automatically at the same
time each day in AWAY Mode or STAY Mode 1.
Programming that allows the system to disarm automatically at the
same time each day in AWAY Mode or STAY Mode 1.
The mode used to arm your system when you leave your premises.
A device that allows you to perform all functions such as arming,
disarming, and programming of your alarm system.
Programming that allows a combination of zones to be monitored while
the system is disarmed.
A unit installed as a satellite component in a security system designed
to detect an intruder within a protected area. Some common forms of
detection devices are passive infrared, smoke, photo electric beams,
reed switches, and vibration sensors.
A system status that does not accept alarms, except for 24-Hour zones.
A method used to monitor and test the condition of your backup
battery.
A programmed delay of the system alarm responses that allows a
person to enter a building through the entry door to turn the system off.
codepad, or siren.
A method of overriding the safety feature that prevents arming with a
faulted zone on a control panel.
If a system is armed and Zone 1 is violated, the entry delay starts
timing. If Zone 2 is violated, the entry delay time is handed over to the
Zone 2 and so on, to Zones 3 and 4. This is known as sequential hand-
over delay.
User's Guide
Control Panel
Bosch Security Systems, Inc.