Abs Indicator Light - KYMCO X-Town 300 Manual

CONTROLS & FEATURES

ABS indicator light

The ABS indicator light is located on the right side of
the multifunction meter. This ABS system will
self-diagnose itself, if it's normal, the indicator light will
come on when the ignition switch is turned on and
goes off shortly after the vehicle starts moving. The
ABS indicator light will stay off as long as the ABS
system works normally.
If an ABS fault is detected by the ABS ECU, the ABS
indicator will light on and stay on until the fault is
resolved. Even there's an ABS system failure, the
system will work normally in conventional braking
condition just like a vehicle without ABS system.
▆
NOTE: If the ABS indicates a fault, it's very important to make
the authorized KYMCO dealer to check the ABS system
immediately.
15