18. LIGHTS/INSTRUMENT/SWITCHES/HORN
TURN SIGNAL LIGHT
Remove the turn signal light shell and the
bulb.
Check the bulb for damage and replace with
a new one if necessary.
The installation sequence is the reverse of
removal.
STOP LIGHT/TAIL LIGHT
Remove the two taillight shell screws and
the shell.
Remove the bulb and check the bulb for
damage. Replace with a new one if
necessary.
Bulb Specification: 12V 21/5W
IGNITION SWITCH
REMOVAL
Disconnect the ignition switch wire
coupler.
Remove the two bolts attaching the ignition
switch.
Remove the ignition switch.
18-3
VENOX250/250i
Bulb
Bulb
Bolt
Ignition Switch
Reflector