Tires Inspection; Minimum Tread Depth - KYMCO X-Town 300 Manual

Table of Contents

Advertisement

Tires Inspection

Tire wear changes the tire profile and may
affect the vehicle's handling characteristics.
Check the tire condition before each riding.
Replace the tires if tread depth is less than
the following limit:

Minimum tread depth:

Front: 0.8 mm (0.03 in)
Rear: 0.8 mm (0.03 in)
▆NOTE: Measure the tread depth
judge by a visual inspection.
44
MAINTENANCE
NOTE: Be sure to balance the wheel after
repairing a puncture or the tire. Proper wheel
balance is important to avoid variable contact
between tire and ground, and to avoid uneven tire
wear.
NOTE: Replace the tires if there's visual
evidence of damage as cracks or cuts.
, do not
An improperly repaired, installed, or
balanced tire can cause you to lose
control of your scooter or shorten tire life.
Ask the authorized KYMCO dealer, or a
qualified tire shop to perform tire repair,
replacement, and balancing due to the
proper tools and experience are required.
1
Always install tires according to the
2
rotation direction shown by arrow on the
sidewall of each tire.
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents