Controls&Features; Ignition Switch - KYMCO X-Town 300 Manual

SECTION 2 - CONTROLS&FEATURES

IGNITION SWITCH

To operate the ignition switch and it
" " Position:
All electrical circuits are off. The engine will not
start or run.
" " Position:
The ignition circuit is "ON" and engine can be
started. The key can not be removed from the
ignition switch in this position.
" " Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the "
position and remove the key. All electrical circuits
are off.
" " Position:
With the ignition key at the "
engine is running), push the key in and turn it
With the ignition key in the "
s functions:
'
engine is not running), turn the counterclockwise
from the "
Pull up on the back portion of the seat to lift it up.
"
" position (the
" to the "
" position.
" position (the