Table of Contents
Advertisement
show ipsla mpls lsp-monitor lpd
show ipsla mpls lsp-monitor lpd
To display LSP Path Discovery (LPD) operational status, use the show ipsla mpls lsp-monitor lpd command
in EXEC mode.
show ipsla mpls lsp-monitor lpd {statistics [group-ID| aggregated group-ID]| summary group}
statistics group-ID
aggregated group-ID
summary group- ID
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.6.0
Usage Guidelines
For the aggregated group ID, a maximum of two buckets are allowed.
Task ID
Task ID
monitor
Examples
The following sample output is from the show ipsla mpls lsp-monitor lpd statistics command:
RP/0/0/CPU0:router#
Group ID: 100001
Latest path discovery start time
Latest path discovery return code
Latest path discovery completion time (ms): 3450
Completion Time Values:
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
226
show ipsla mpls lsp-monitor lpd statistics 10001
NumOfCompT: 1
CompTMin: 3450
IP Service Level Agreement Commands
Displays statistics for the specified LPD group,
including the latest LPD start time, return code,
completion time, and paths.
Displays the aggregated statistics of the LPD group.
Displays the current LPD operational status, which
includes LPD start time, return code, completion time,
and all ECMP path information.
Modification
This command was introduced.
Operations
read
: 00:41:01.129 UTC Sat Dec 10 2005
: OK
CompTMax : 3450
CompTAvg: 3450
OL-24735-01
Advertisement
Table of Contents
