National Instruments NI SCXI -1339 Installation Instructions Manual page 7

Terminal block for the ni scxi-1129

Maximum Current

Environmental

Safety

Note

For UL and other safety certifications, refer to the product label, or visit

ni.com/certification

appropriate link in the Certification column.

Electromagnetic Compatibility

For EMC compliance, you must operate this device with shielded cabling.

Note

Maximum current

(per channel) .......................................... 2 ADC, 2 AAC

Operating temperature............................ 0 to 50 °C

Storage temperature ............................... –20 to 70 °C

Humidity ................................................ 10 to 90% RH, noncondensing

Pollution Degree .................................... 2

Approved at altitudes up to 2,000 m

Indoor use only

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

and laboratory use:

•

IEC 61010-1, EN 61010-1

•

UL 3111-1, UL 61010B-1

•

CAN/CSA C22.2 No. 1010.1

, search by model number or product line, and click the

Emissions ............................................... EN 55011 Class A at 10 m

Immunity................................................ EN 61326:1997 + A2:2001,

EMC/EMI............................................... CE, C-Tick, and FCC Part 15

FCC Part 15A above 1 GHz

Table 1

(Class A) Compliant

NI SCXI-1339 Installation Instructions