Advertisement
6
5
4
1 Screw Terminals
2 Rear Connector
3 Thumbscrew
4. Install the Terminal Block
Install the SCXI-1129 if you have not already done so. Refer to the NI Switches
Note
Getting Started Guide for more information.
© National Instruments Corporation
4 Strain-Relief Screw
5 Strain-Relief Bar
6 Safety Ground Lug
Figure 2. SCXI-1339 Parts Locator Diagram
To connect the SCXI-1339 to the SCXI-1129 front panel, refer to Figure 3
and complete the following steps:
1.
Plug the SCXI-1339 onto the front connector of the SCXI-1129.
2.
Tighten the top and bottom thumbscrews on the terminal block rear
panel to hold it securely in place.
3
5
NI SCXI-1339 Installation Instructions
1
2
Advertisement
