Monitor Volume - Ricoh aficio 350 Operating Instructions Manual

FACSIMILE USER TOOLS
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
7
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Enter the function number for
"Authorized RX" using the num-
ber keys.
F
Enter the function number for
"Print Sender List" using the
number keys.
G
Press the { { { { Start} } } } key.
Note
When you press [Cancel], the
printing stops and the display
shown in 4 appears again.
H
Press [PrevMenu] twice.
I
Press the { { { { User Tools/Counter} } } } key.
192

Monitor Volume

You can change the volume of the fol-
lowing sounds the machine makes.
On Hook
When you press the { { { { On Hook Dial} } } }
key.
Transmission
When the machine send a mes-
sage.
Reception
When the machine receive a mes-
sage.
DiallingDialing
After pressing the { { { { Start} } } } key, this
sound is output until the line con-
nects to the destination.
Printing
Sounds when a received message
has been printed. See P.64 "Print
Completion Beep".
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the { { { { Fax} } } } key.
B
Press the { { { { User Tools/Counter} } } } key.
Sort
1-Sided 2-Sided
2
1
1
Book 2-Sided
Staple
2
Stack
2-Sided 2-Sided
2
2
Enhanced Auto Reduce/
User Tools / Counter
ND2L01E0