Ricoh aficio 350 Operating Instructions Manual page 145

FACSIMILE USER TOOLS
F
Press the Quick Dial key which
you want to register.
Note
If you press a wrong key, press
[PrevMenu] then try again.
You can press [Status] to see
which Quick Dial keys have
been programmed.
G
Enter a fax number using the
number keys.
7
Note
If you make a mistake, press the
{ { { { Clear/Stop} } } } key and try again.
If a fax number is already regis-
tered in this Quick Dial key, the
number and communication
type are shown on the display.
If you wish to change the fax
number, press the { { { { Clear/Stop} } } }
key and enter another number.
You cannot omit the fax num-
ber.
H
Press [Name] .
Note
If you wish to omit the destina-
tion name, go to step 11.
130
I
Enter the destination name.
Note
If a destination name is already
registered in this Quick Dial
key, the name is shown on the
display. If you wish to change
this name, press the { { { { Clear/Stop} } } }
key and enter another name.
Reference
P.213 "Entering Text"
J
Press [OK].
The fax number and name are dis-
played.
K
Press [OK] to register the new set-
ting.
Note
If you press [Cancel], the entered
values are canceled and the dis-
play shown in step 7 appears
again.
L
Press [Exit].
The display shown in step 6 ap-
pears again.
M
Press the { { { { User Tools/Counter} } } } key.
ND1X03E0