Ricoh aficio 350 Operating Instructions Manual page 196

Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Enter the function number for
"Forwarding" using the number
keys.
F
Enter the function number for
"Delete Sender" using the num-
ber keys.
G
Choose the Specified Sender you
want to delete by entering its code
with the number keys.
Note
If you make a mistake, press the
{ { { { Clear/Stop} } } } key and enter a cor-
rect number.
If you have a mistake with the
second digit, press [No] and en-
ter the number again.
KEY OPERATOR SETTINGS
H
Press [Yes].
Note
If you press [No], the sender is
not deleted and the display
shown in 7 appears again.
I
Press [Yes].
The sender is deleted.
Note
If you press [No], the sender is
not deleted and the display
shown in 5 appears again.
J
Press [PrevMenu] 3 times.
K
Press the { { { { User Tools/Counter} } } } key.
Specified Sender/Forwarding Station list
Print this list to find out which Specif-
ic Senders are assigned to which For-
warding Stations.
ND1X03E0
7
ND1X03E0
181