Table of Contents
Advertisement
16. Removal and installation of the projector covers
16.8 Installation of the top cover plate of the Light Processor compartment
Necessary tools
3mm Allen wrench.
How to install the top cover plate from the Light Processor compartment?
1. Install the top cover plate as follows:
a) Approach the projector with the top cover plate tilted as illustrated and insert the two hooks of the top cover plate into the
projector chassis (see detailed illustration image 16-10).
b) Lower the top cover plate completely.
c) Grip the two knobs (reference 2 image 16-10) , slide the top cover plate to the rear side of the projector and ensure that all
slots (reference 1 image 16-10) of the top cover plate are engaged.
Image 16-10
2. Fasten the top cover plate with four screws (reference 1 image 16-11). Use a 3mm Allen wrench.
150
2
C
1
C
A
B
R5905961 ZEUS 09/03/2015
Advertisement
Table of Contents
