Page 2
Datalogic S.p.A. and/or its affiliates ("Datalogic" or "Datalogic USA, Inc.”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the pur- chaser' s own internal business purposes.
Page 3
If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the Software, and you must contact the party from whom you acquired the Datalogic Product for instructions.
Page 4
52.227-19 or in the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable. 9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable Magellan™ 8300/8400...
Page 5
Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United Nations Convention on International Sale of Goods" shall not apply to this Agreement.
Quick Reference The object of this manual is to provide general operational information for the user. For more product details, including installation, set-up, pro- gramming and advanced user information, reference the Product Refer- ence Guide (PRG), which is available for viewing and download from the website listed on the back cover of this manual.
Scanning Items Push or slide items through the 360° scan zone (shown here) in either a left-to-right or right-to-left motion. The scanner has the ability to “see” a bar code located on any side (left, right, front, back or bottom) of a prod- uct, so there’s rarely a need to reorient an item in order to scan it.
Page 9
Scan Motion ® With the 360° scan pattern and advanced FirstStrike decoding software, the Magellan 8300/8400 can read most hard-to-read codes quickly and without excess orientation. The scanner should have been installed so that leading and trailing edges of the L-Platter are flush with the countertop to enhance smooth, Figure 3 slide-through scanning (reference ).
Page 10
Cleaning Exterior surfaces and scan windows exposed to spills, smudges or debris accumulation require periodic cleaning to assure best performance during scanning and weighing operations. Use a clean, lint-free cloth or paper towel dampened with a nonabrasive, mild, water-based window cleaner to wipe away stains, smudges, fingerprints, spills, etc.
Weighing Items Using the All-Weighs Platter ® Items to be weighed can be placed anywhere on the L-shaped All- ® Weighs platter (weigh platter) surface. Oversized items can even be accurately weighed while leaned against the center of its vertical section as shown.
Page 12
Table 1. Scanner and Scale Indications DURATION COMMENT INDICATION The scale is at rest and reads zero Scale (Yellow) LED on steady Scale at Zero weight. The scale is ready to weigh. Scanner (Green) LED on steady Scanner Active The scanner is ready for operation. and dim Scanning is immediately available.
Page 13
Volume/Tone Push Button The Volume/Tone Push Button also performs multiple functions depending upon the duration of time it is pressed: Table 2. Volume/Tone Push Button Functions PRESS FUNCTION COMMENT DURATION Alternatively, the scanner can be awakened by: Momentary Wakes scanner - Moving an object through the scan zone.
Scale Zero Push Button The Scale Zero Push Button is used for two functions as described Table 3 . This button has no function on “scanner-only” models. Table 3. Scale Zero Push Button Functions PRESS FUNCTION COMMENT DURATION When programmed to do so, the yellow Scale LED should be lit when no weight is on the scale, indicating scale at zero.
EAS-Enabled Systems Electronic Article Surveillance (EAS) systems are aftermarket options, ® ® and are installed by either Sensormatic or Checkpoint technicians at your site depending upon which EAS product package is purchased to use with your scanner. NOTE Once the system is activated, EAS security tags are automatically deacti- vated by passing items over the EAS antenna located beneath the scan- ner’s platter.
Warranty Datalogic warrants to Customer that Datalogic' s products will be free from defects in mate- rials and workmanship for a period of 1 year from product shipment. Warranty Coverage Datalogic warrants that the goods delivered under these General Terms for the Sale of Goods shall be free from defects in materials and workmanship under normal and proper use during the Warranty Period (as defined below).
Page 17
Datalogic shall pay for the return of the prod- uct to Buyer if the shipment is to a location within the country in which the Datalogic ser- vice center is located. Buyer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
Datalogic without notice may (1) bill and declare due and pay- able all undelivered products under this or any other contract between Datalogic and the Buyer;...