Extension Telephone; Using Remote Codes - Brother FAX-2480C User Manual

External and extension
phones
Connecting an external or

extension telephone

You can connect a separate telephone
directly to your machine as shown in the
diagram below.
1 Extension telephone
2 External telephone
Connect the telephone line cord to the jack
labeled EXT.
When you are using an external phone, the
LCD shows Ext. Tel in Use.
Using external and extension
telephones
If you answer a fax call on an extension or an
external telephone connected to the EXT.
jack of the machine, you can make your
machine take the call by using the Fax
Receive Code. When you press the Fax
Receive Code l 5 1, the machine starts to
receive the fax.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code # 5 1 to take the
call at an extension phone. (See F/T Ring
Time (Fax/Tel mode only) on page 38.)
Telephone Services and External devices
If you answer a call and no one is on
the line:
You should assume that you're receiving a
7
manual fax.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
7
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 39.)
1
Using a non-Brother cordless
external telephone
2
(FAX-2480C only)
If your non-Brother cordless telephone is
connected to the EXT. jack of the machine
and you typically carry the cordless handset
elsewhere, it is easier to answer calls during
the Ring Delay.
If you let the machine answer first, you will
have to go to the machine so you can press
Hook/Hold to send the call to the cordless
handset.

Using remote codes

Fax receive code
If you answer a fax call on an extension or
7
external telephone, you can tell your machine to
receive it by dialing the fax receive code l 5 1.
Wait for the chirping sounds then replace the
handset. See Easy Receive on page 39. Your
caller will have to press Start to send the fax.
Telephone answer code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T
(double) ring after the initial ring delay. If you
pick up the call on an extension phone you
can turn the F/T ring off by pressing # 5 1
(make sure you press this between the rings).
7
7
7
7
7
7
49