General Overview; Change Network Settings; Opening Ix Support Tool - Aiphone IX-MV Quick Start Programming Manual

GENERAL OVERVIEW:

For basic system programming, all steps are REQUIRED unless marked OPTIONAL. Refer to the IX Support Tool Setting
Manual on the DVD-ROM included with the IX-MV for complete programming information.
Step 1: Change PC Network Settings (OPTIONAL)
-
Allows the PC to communicate with the Door Stations and Master Stations.
Step 2:

Opening IX Support Tool

-
Open program, defi ne size of system, and name of system.
Step 3: Station Information - Customizing Station Numbers and Names (OPTIONAL)
-
Create unique station numbers and names.
Step 4: Network Settings
-
Assign IP address (batch).
(Refer to the IX Support Tool Setting Manual when using an IPv6 network)
Step 5: Association Settings
-
Link station settings to stations found in Search.
Step 6: System Information - Address Book "Master Station" (OPTIONAL)
-
Add or remove stations from the Address Book.
Step 7: Call Settings - for Door Stations
-
Select called station, call level, and broadcast method.
Step 8: Setting the Time
-
Manually enter time or sync time with PC.
Step 9: Updating the System
- Uploading setting fi le to stations (batch).
Step 1:
Change Network Settings (OPTIONAL)
The Door Station and Master Station's default IP address is https://192.168.1.160. The PC will need to be set in the same
subnet in order to connect to the Door Stations and Master Stations.
A. Open Control Panel
- Windows XP (Classic View)
Connection Status window.
- Windows 7 (Category View)
Local Area Connection to open the Local Area Connection Status window.
B. Click the Properties button to open Local Area Connection Properties window.
C. Scroll down and left click Internet Protocol (TCP/IP) then click Properties button to open Internet Protocol Properties
window.
D. Select the Use the following IP address radio button. Type in the IP address 192.168.1.100 (the last number can be
any valid host address except 160) and change the subnet mask to 255.255.255.0. Click [OK].
E. Click [OK] in Connection Properties window to accept these changes.
Step 2:
Opening IX Support Tool
Connect all IX stations and the programming PC to the same network.
Step 2.1
Install the IX Support Tool on the programming PC.
Step 2.2
Open the IX Support Tool.
Step 2.3
Log in. Default Settings:
Step 2.4
ID: admin
Password: admin
2 | IX Quick Start Programming Guide
Network Connections
Network and Internet
Double click Local Area Connection to open
View network status and tasks Click