M8X20 Bolts - HELIX HR 1000 Assembly Manual

PAGE 11
3 ASSEMBLY INSTRUCTIONS
STEP 5:
ASSEMBLE UPRIGHT
Place the upright onto the main frame as shown and install 4 bolts from the Step 5 parts bag. After all 4 bolts are installed,
firmly tighten each bolt. Do not firmly tighten any bolts until all the bolts are installed. Fully securing one bolt before the
others are in place may result in the post being tilted or misaligned.
Next, connect the wires from the main body to the wires from the upright.
(#21) M8x20 Bolt x 4
(#30) S6 x 1
3
21
3
21
1
HR1000-A5.indd 11 01/08/2017 16:06