Enable The Voice Vlan Mode For Ports - NETGEAR XS512EM User Manual

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
The Switch Information page displays.
5. Select VLAN > Voice VLAN > Properties.
The Voice VLAN Properties page displays.
6. In the Voice VLAN ID menu, select the voice VLAN ID.
You can select either the default VLAN ID (1) or a VLAN ID that you manually added (see
802.1Q-Based VLANs in a Basic Configuration
Advanced Configuration
7. In the Class of Service menu, select the class value for the voice VLAN.
You can select a value from 0 (the lowest priority) to 7 (the highest priority). The default CoS value is 6.
8. Click the Apply button.
Your settings are saved.

Enable the Voice VLAN Mode for Ports

You can enable the voice VLAN mode for individual ports so that these ports become members of the voice
VLAN. By default, the voice VLAN mode is disabled for all ports.
To enable the voice VLAN mode for one or more ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN > Voice VLAN > Port Settings.
The OUI Port Settings page displays.
6. Select one or more ports.
7. In the Voice VLAN Mode menu, select Enable.
By default, the voice VLAN mode is disabled for all ports.
8. Click the Apply button.
Your settings are saved.
on page 27 or
on page 28).
Use VLANS for Traffic Segmentation
32
Create 802.1Q-Based VLANs in an
Create