Create 802.1Q-Based Vlans In A Basic Configuration - NETGEAR XS512EM User Manual

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
The VLAN Configuration and VLAN Membership sections display.
9. In the VLAN Identifier menu, select the VLAN.
10. Select the ports that you want to add to the VLAN by doing the following:
a. (Optional) In the Group Operation menu, select either Select All or Remove All.
All ports are either added to the VLAN or removed from the VLAN.
b. Select or remove individual ports by selecting the check boxes that are associated with the port
numbers.
Note If ports are members of the same LAG, you must assign them to the same VLAN.
c. Click the Apply button.
Your settings are saved. In the VLAN Membership table, the ports display as members of the VLAN.
11. To select ports for another VLAN, repeat

Create 802.1Q-Based VLANs in a Basic Configuration

A 802.1Q-based VLAN configuration lets you assign ports on the switch to a VLAN with an ID number in
the range of 1–4093. By default, all ports are members of VLAN 1.
In an advanced 802.1Q-based VLAN configuration, you can set up VLANs to which you can add tagged or
untagged ports and you can use port VLAN ID (PVID). For more information,
in an Advanced Configuration
To create 802.1Q-based VLANs in a basic configuration:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN > 802.1Q.
The Basic 802.1Q VLAN Status page displays.
Step 9 and
on page 28.
Use VLANS for Traffic Segmentation
27
Step 10.
Create 802.1Q-Based VLANs