Manage Netgear Switch Discovery Protocol - NETGEAR XS512EM User Manual

12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
The Switch Information page displays.
5. Select System > Management > Discovery and Management.
The Discovery and Management page displays.
6. In the Bonjour section, select one of the following radio buttons:
• Disable. Bonjour is disabled.
• Enable. Bonjour is enabled. This is the default setting.
7. Click the Apply button.
Your settings are saved.

Manage NETGEAR Switch Discovery Protocol

A NETGEAR device or application that supports NETGEAR Switch Discovery Protocol (NSDP) can discover
the switch in the network so that you can find the switch IP address and log in to the local browser interface
of the switch. NSDP is enabled by default. You can disable NSDP for security reasons.
To manage NSDP:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Management > Discovery and Management.
The Discovery and Management page displays.
6. In the NSDP section, select one of the following radio buttons:
• Disable. NSDP is disabled.
• Enable. NSDP is enabled. This is the default setting.
7. Click the Apply button.
Your settings are saved.
Manage Network Settings
43