Precor EFX 532 Owner's Manual page 19

C O M M E R C
Note: The odometer and hour meter are updated at the end of each course. If the
course is terminated by turning off the power, the data for that course is lost.
Press Enter again and the unit's three digit Software Version (V1.23, for
example) and Part Number (38314-123, for example) appear on the display.
This information is useful when ordering parts.
Press Enter once again and the Error Log appears. The EFX stores the last 10
errors that have been detected. Press the
sage. To return to the Precor banner, press Enter or Reset. An example of a
recorded error message appears below:
5:
Indicates sequence.
(5 th error in Log)
Note: To clear (delete) the error log, press Quick Start and Reset simulta-
neously for at least 4 seconds while viewing the list. Prompts appear on the
display and let you know when the error messages have been deleted ("cleared"
from memory).
Important: You cannot retrieve the error log once you have deleted it.
I A L P R O D
Indicates the type of error.
ER42
U C T S D I
or key to view each error mes-
1234 STRIDES
Stride count when
error occurred.
V I S I O N
5678 HOURS
Hour meter reading
at the time the error
detected.
page 19