Alcatel-Lucent 7210 Sas-x Service Manual page 864

Show, Clear, Debug Commands
Sample Output
*A:ALA-12# show service id 2 arp
==============================================================================
ARP Table
==============================================================================
IP Address
------------------------------------------------------------------------------
190.11.1.1
==============================================================================
*A:ALA-12#
base
Syntax base
Context show>service>id
Description Displays basic information about the service ID including service type, description, SAPs and SDPs.
Output Show Service-ID Base — The following table describes show service-id base output fields:
Page 864
Type
Age
Interface
Port
MAC Address
00:03:fa:00:08:22 Other
Label
Service Id
Vpn Id
Service Type
Description
Customer Id
Last Mgmt Change
Adm
Oper
Mtu
— FDB entries created by management.
Static
Learned — Dynamic entries created by the learning process.
OAM — Entries created by the OAM process.
The time elapsed since the service was enabled.
The interface applied to the service.
The port where the SAP is applied.
Type Age
00:00:00
The service identifier.
Specifies the VPN ID assigned to the service.
Specifies the type of service.
Generic information about the service.
The customer identifier.
The date and time of the most recent management-initiated change to
this customer.
The desired state of the service.
The operating state of the service.
The largest frame size (in octets) that the service can handle.
7210 SAS-X OS Services Guide
Interface
ies-100-190.11.1
Description
Port
1/1/11:0