Show Commands
Sample
*A:7210-SAS>show>service# id 200 stp
===============================================================================
Stp info, Service 200
===============================================================================
Bridge Id
Root Bridge
Primary Bridge
Mode
Vcp Active Prot.
Root Port
===============================================================================
Stp port info
===============================================================================
Sap/Sdp Id
-------------------------------------------------------------------------------
Backbone VPLS
1/1/15:200
===============================================================================
*A:7210-SAS>show>service#
isid-using
Syntax
isid-using [ISID]
Context
show>service
Description
This command displays services using ISID.
Parameters
ISID — Displays the service using the specified I-component Service ID (ISID).
Page 616
Last Top. Change
Root Port
Backbone VPLS
: 80:00.00:25:ba:08:f6:20
: N/A
: N/A
: Rstp
: N/A
: N/A
Oper-
State
Up
Up
Values
0 — 16777215
Specifies the time (in hundredths of a second) since the last time a
topology change was detected by the Spanning Tree Protocol
instance associated with this service.
Specifies the port number of the port which offers the lowest cost
path from this bridge to the root bridge.
Displays the ID of the B-VPLS
Top. Change Count : 0
Stp Oper State
Topology Change
Last Top. Change
External RPC
Port-
Port-
Role
State
N/A
Forward
N/A
Forward
7210 SAS-X, R6 OS Services Guide
: Down
: Inactive
: 0d 00:00:00
: 0
Port-
Oper-
Link-
Active
Num
Edge
Type
Prot.
2048
N/A
N/A
N/A
2049
N/A
Pt-pt
N/A