Alcatel-Lucent 7210 Sas-x Service Manual page 519

Sample Output
Ignore Standby Sig : False
*A:DUT-B_sasx>show>service# id 255 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id
Service Type
Description
Customer Id
Last Status Change: 05/20/2000 12:36:10
Last Mgmt Change
Admin State
MTU
MTU Check
SAP Count
Snd Flush on Fail : Disabled
Uplink Type
Propagate MacFlush: Disabled
-------------------------------------------------------------------------------Ser-
vice Destination Points(SDPs)
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
7210 SAS-X, R6 OS Services Guide
Label
High priority
offered
For.InProf
For.OutProf
Managed by Service
Managed by MSTI
Last BPDU from
Managed by SAP
Prune state
Managed by Service
Last BPDU from
Managed by Spoke
Prune state
: 255
: VPLS
: (Not Specified)
: 1
: 05/20/2000 12:36:10
: Up
: 1514
: Enabled
: 0
: MPLS
Sdp Id 12:255 -(1.1.1.1)
Description (Continued)
The packets or octets count of the high priority traffic for the SAP.
The packets or octets count of the in-profile forwarded traffic for the
SAP.
The number of out of profile traffic packets/octets forwarded.
Specifies the service-id of the management VPLS managing this SAP.
Specifies the MST instance inside the management VPLS managing
this SAP.
The bridge ID of the sender of the last BPDU received on this SAP.
Specifies the sap-id inside the management VPLS managing this SAP.
Specifies the STP state inherited from the management VPLS.
Specifies the service-id of the management VPLS managing this spoke
SDP.
The bridge ID of the sender of the last BPDU received on this SAP.
Specifies the sap-id inside the management VPLS managing this spoke
SDP.
Specifies the STP state inherited from the management VPLS.
Vpn Id
Oper State
Def. Mesh VC Id
SDP Bind Count
Host Conn Verify
VPLS Show Commands
Block On Mesh Fail: False
: 0
: Up
: 255
: 2
: Disabled
Page 519