Dhcp Relay - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Interface Settings,
as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Pool Name
Rapid Commit
Preference
Interface Name
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCPv6 Server Operational Information
This window is used to display the DHCPv6 server operational information.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Operational
Information, as shown below:

DHCP Relay

DHCP Relay Global Settings
This window is used to display and configure the global DHCP relay settings.
To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Global Settings, as shown
below:
Figure 4-44 DHCPv6 Server Interface Settings Window
Description
Enter the interface VLAN ID here. The range is from 1 to 4094.
Enter the DHCPv6 server pool name here. This name can be up to 12 characters
long.
Select to enable or disable two-message exchange here. By default, two-
message exchange is not allowed.
Enter the preference value here. Select the Allow Hint option to allow hints.
Enter the interface name here.
Figure 4-45 DHCPv6 Server Operational Information Window
65