Single Ip Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The topology map now includes new features for connections that are a member of a port trunking group. It will
display the speed and number of Ethernet connections creating this port trunk group.
This version will support Switch upload and downloads for firmware, configuration files and log files, as follows:
• Firmware - The Switch now supports MS firmware downloads from a TFTP server.
• Configuration Files - This Switch now supports the downloading and uploading of configuration files both to
(for configuration restoration) and from (for configuration backup) MSs, using a TFTP server.
• Log - The Switch now supports uploading MS log files to a TFTP server.
The user may zoom in and zoom out when utilizing the topology window to get a better, more defined view of the
configuration.

Single IP Settings

This window is used to display and configure the SIM settings. The Switch is set as a Candidate (CaS) as the factory
default configuration and Single IP Management is disabled.
To view the following window, click Management > Virtual Stacking (SIM) > Single IP Settings, as shown below:
The fields that can be configured in SIM State Configure are described below:
Parameter
SIM State
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Role Configure are described below:
Parameter
Role State
Figure 4-86 Single IP Settings Window
Description
Select this option to enable or disable the SIM state on the Switch. Select
Disabled to disable SIM on the Switch.
Description
Select to change the SIM role of the Switch. Options to choose from are
Candidate, and Commander.
• Candidate - A Candidate Switch (CaS) is not the member of a SIM group but
is connected to a Commander Switch. This is the default setting for the SIM
role of the Switch.
• Commander - Select to make the Switch a Commander Switch (CS). The
user may join other Switches to this Switch, over Ethernet, to be part of the
SIM group. Choosing this option will also enable the Switch to be configured
104