Table of Contents
Advertisement
3
Specifications and Environmental
Conditions
3.1
Specifications
Range
Stability
Uniformity
Temperature Setting
Set-Point Resolution
Display Temperature
Resolution
Digital Setting Accuracy
Digital Setting
Repeatability
Heaters
Access Opening
Depth
Wetted Parts
Power
Volume
Weight
Size
Automation Package
Safety
3.2
Environmental Conditions
Although the instrument has been designed for optimum durability and trou-
ble-free operation, it must be handled with care. The instrument should not be
operated in an excessively dusty or dirty environment. Maintenance and clean-
ing recommendations can be found in the Maintenance Section of this manual.
The instrument operates safely under the following conditions:
• ambient temperature range: 5 - 50°C (41 - 122°F)
• ambient relative humidity: maximum 80% for temperature <31°C, de-
creasing linearly to 50% at 40°C
3 Specifications and Environmental Conditions
180°C to 550°C
†
±0.002°C at 200°C (salt)
±0.004°C at 300°C (salt)
±0.008°C at 550°C (salt)
±0.005°C at 200°C (salt)
±0.020°C at 550°C (salt)
Digital display with push-button data entry
0.01°C; high-resolution mode, 0.00018°C
0.01°C
±1°C
±0.02°C
400/1200/2000 Watts
5" x 10" (127 x 254 mm)
12" (305 mm)
304 stainless steel
230 VAC (±10%), 50/60 Hz, 10 A, 2200 W
7.1 gallons (27 liters), requires 112 lb. of bath salt
180 lb. (82 kg)
28.5" H x 20.4" W x 24.5" D
(724 x 518 x 622 mm)
Interface -it software and RS-232 computer interface are available for set-
ting bath temperature via remote computer. For IEEE-488, add the
2001-IEEE to the automation package.
OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per
IEC61010-1
Specifications
6050H
11
Advertisement
Table of Contents
