Table of Contents
Advertisement
Next press "EXIT" to return to the temperature display or "SET" to access the
temperature scale units selection.
S
9.4
Temperature Scale Units
The temperature scale units of the controller may be set by the user to degrees
Celsius (°C) or Fahrenheit (°F). The units are used in displaying the bath tem-
perature, set-point, vernier, proportional band, and cutout set-point.
The temperature scale units selection is accessed after the vernier adjustment
function by pressing "SET". From the temperature display function access the
units selection by pressing "SET" 4 times.
25.00 C
S
1. 25.0
S
C 25.00
S
0.00000
S
Un= C
Press "UP" or "DOWN" to change the units.
U
Un= F
Press "SET" to accept the new selection and resume displaying the bath
temperature.
S
Access scale units
Bath temperature
Access set-point memory
Set-point memory
Access set-point value
Set-point value
Access vernier
Vernier setting
Access scale units selection
Scale units currently selected
Change units
New units selected
Set the new units and resume temperature display
9 Controller Operation
Temperature Scale Units
35
Advertisement
Table of Contents
