4 Quick Start
Setting the Temperature
E
Return to the temperature display
24.73 C
Bath temperature display
The bath will heat or cool until it reaches the new set-point temperature. Set the
heater switch to position "MED" or "HIGH" to allow the bath to more quickly
reach a higher temperature. The higher heater settings may be necessary to
reach and control at higher temperatures.
When setting the set-point temperature be careful not to exceed the temperature
limit of the bath fluid. The over-temperature cutout should be correctly set for
added safety. See Section 9.8.
To obtain optimum control stability adjust the proportional band as discussed in
Section 9.7.
15