Canon WFT-E1 Network Setup Manual page 112

Wireless file transmitter
Hide thumbs Also See for WFT-E1:
Table of Contents

Advertisement

Troubleshooting
Wireless LAN access point
5
Is the wireless LAN access point's power on?
Turn the wireless LAN access point's power on.
6
If you are using an IEEE802.11a wireless LAN access point, is the wireless
LAN access point fixed for IEEE802.11a?
Set the wireless LAN access point to allow connections with IEEE802.11b/g.
7
If you are filtering by MAC address, did you register the WFT-E1's MAC
address in the wireless LAN access point?
Register the WFT-E1's MAC address (p.121 [MAC Address]) in the wireless LAN access point.
62: No response from wireless LAN terminal
WFT-E1
1
Is the WFT-E1 set to connect in infrastructure mode?
Set the WFT-E1 to connect via ad hoc. (p.121 [Advanced settings])
2
Is the WFT-E1's antenna loose?
Make sure that the WFT-E1's antenna connection is secure.
Wireless LAN terminal
3
Is there a wireless LAN terminal nearby to connect via ad hoc?
Prepare a wireless LAN terminal set up to connect via ad hoc near the WFT-E1.
FTP server
4
Is the FTP server that is connected to (or with a built-in) a wireless LAN terminal powered on?
Turn the FTP server's power on to be able to connect via ad hoc.
63: Wireless LAN authentication failed
1
Are the WFT-E1 and the wireless LAN access point set to have the same
authentication method?
Available authentication methods for the WFT-E1 are [Open System], [Shared
key], and [WPA-PSK]. (p.121 [Advanced settings])
To use infrastructure mode for AirPort, you cannot connect using the [Open System]
method. Set a [Shared key] in the WFT-E1. (p.70, p.121 [Advanced settings])
2
Are the WFT-E1 and the wireless LAN access point set to have the same
encryption key for authentication?
Make sure there are no differences between upper- and lower-case characters, and
set the correct encryption key for authentication in the WFT-E1 and the wireless
LAN access point. (p.19, 23, 64, 70, and 121 [Advanced settings])
3
If you are filtering by MAC address, did you register the WFT-E1's MAC
address in the wireless LAN access point?
Register the WFT-E1's MAC address (p.121 [MAC Address]) in the wireless LAN access point.
112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wft-e1a

Table of Contents