Enabling And Disabling The Radio Alias; Controlling The Display Backlight - Motorola APX 6000XE User Manual

A, B, C, ... or Y consist of three zones. You can use the
preprogrammed 3-position A-B-C switch to select the first,
second or third zone in an EZB.
This feature allows user to navigate from up to 75 zones in
25 EZBs.
NOTICE:
The Zone Select feature must to be preprogrammed
to the 3-position A-B-C switch, while the Enhanced
Zone Bank feature must be preprogrammed to any
side button or Top (Orange) button before you can
use this feature.
1 Press the preprogrammed EZB Up or EZB Down
button to scroll the EZB up or down or press and
hold the preprogrammed EZB Up or EZB Down
button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the first,
second or third zone in the selected EZB.
Send Feedback

Enabling and Disabling the Radio Alias

This feature allows you to display or hide the radio alias
(name).
Press the Menu Select button directly below MyID.
The display shows momentary Radio ID off, and the radio
alias disappears from the Home screen or the display
shows momentary Radio ID on, and the radio alias
appears on the Home screen.

Controlling the Display Backlight

You can enable or disable the radio's display backlight as
needed, if poor light conditions make the display or keypad
difficult to read.
Depending on how your radio is preprogrammed, you can
also maintain a minimum backlight level on the radio's front
display.
English
165