Mission Critical Geofence; Entering Mission Critical Geofence - Motorola APX 6000XE User Manual

present in a Geofence area. This TMS remains open on the
display until user presses exit/home to exit this screen.
NOTICE:
If there is another incoming text message before
you exit the previous message, the message screen
is refreshed to show the latest message.
The following procedure guides you to exit the text
message received.
Press the Menu Select button below Exit or
return to Home screen.
The other operations are the same as normal dynamic
regroup command.
When the radio exits the Geofence area, your radio reverts
to original channel or newly assigned talkgroup. The radio
display shows the new channel together with Voice
Announcement to indicate the changes. Voice
Announcement of the new channel only works if that
channel is configured with Voice Announcement.

Mission Critical Geofence

This feature allows the radio to use the GPS receiver to
determine radio location at frequent intervals.
Send Feedback
This feature also allows the radio to evaluate if the radio is
within the Geofence area in real time.
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.

Entering Mission Critical Geofence

When the radio enters the predefined Geofence area, the
radio displays <Geofence Alias> with intelligent backlight
and the user hears a Voice Announcement. Zone and
to
channel alias of the Geofence area is displayed. If the radio
is set to manual, the user can choose either to proceed
with zone and channel change or cancel the change.
The radio then connects to the designated talkgroup. The
radio displays the talkgroup alias and dynamic regroup
tone sounds. The transmit power level changes and the
radio shows a direct text message content without any user
operation.
English
133