Configuring Cdp; Setting Cdp Properties - Cisco SF500-24 Administration Manual

9

Configuring CDP

143
• LLDP Optional TLVs
Size (Bytes)
-
Status
- —If the LLDP MED optional TLVs packets were sent, or if they were
overloaded.
• LLDP MED Inventory
Size (Bytes)
-
Status
- —If the LLDP MED inventory packets were sent, or if they were
overloaded.
• Total (Bytes)—Total number of bytes of LLDP information in each packet
• Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
This section describes how to configure CDP.
It covers the following topics:
•

Setting CDP Properties

• Editing CDP Interface Settings
• Displaying CDP Local Information
• Displaying CDP Neighbors Information
• Viewing CDP Statistics
Setting CDP Properties
Similar to LLDP, CDP (Cisco Discovery Protocol) is a link layer protocol for directly
connected neighbors to advertise themselves and their capabilities to each other.
Unlike LLDP, CDP is a Cisco proprietary protocol.
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
—Total LLDP MED optional TLVs packets byte size.
—Total LLDP MED inventory TLVs packets byte size.
Administration: Discovery
Configuring CDP