Chassis Rear Rack-Mount Brackets - Cisco ASR 1002 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1002:

Table of Contents

Cisco ASR 1002 Router Overview and Installation

The following image shows where to attach the front rack-mount brackets to the Cisco ASR 1002 Router.

Figure 12: Attaching the Front Rack-Mount Brackets to the Cisco ASR 1002 Router

Step 2

Position the front rack-mount bracket top hole with the chassis first top hole behind the side vent holes.

Step 3

Insert and tighten the black screws on one side.

Step 4

Repeat Step 1 through Step 3 on the other side of the chassis. Use black screws to secure the rack-mount brackets to the

chassis.

Step 5

Install the chassis in a rack. To install the Cisco ASR 1002 Router in a rack, go to the

Router in a Rack, on page

Chassis Rear Rack-Mount Brackets

If you are rack-mounting the chassis using the rear rack-mount brackets, then this type of installation provides

for the chassis being recessed in the rack.

To install the rear rack-mount brackets on the Cisco ASR 1002 Router, perform the following steps:

SUMMARY STEPS

1. Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear rack-mount

bracket with the ear and holes facing outward and towards the rear of the chassis.

2. Position the rear rack-mount bracket top hole with the chassis top hole from the back.

3. Insert and tighten the screws on one side.

4. Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the rear

rack-mount brackets to the chassis.

Front rack-mount bracket ear

and holes

Front rack-mount bracket

25.

Chassis Rear Rack-Mount Brackets

Installing the Cisco ASR 1002

Cisco ASR 1000 Series Router Hardware Installation Guide

Front rack-mount bracket

screws

Table of Contents